SYSTEM FEATURES

Water pump power:0.5 hp

Water Pump Voltage:230V Three Phase

Aspiration Meters:8 Mts

Flow at 10 meters height:17 L/min

Flow at 15 meters height:20 L/min

Flow at 20 meters height:17 L/min

Single Phase Surface Pump CPA 40M 0.5CV

€197.71

PRODUCT INFORMATION
The surface pump CPA 40M 0.5CV is an electric peripheral surface pump. This has a maximum suction capacity of up to 8m with the installation of a non-return valve. The pump can be primed with the screw located on the suction port. Both the outlet and suction are 1 inch in diameter and are female. The pump body is cast iron, the shaft is stainless steel, the mechanical seal is ceramic graphite and the impeller is stamped brass. It has a weight of 6kg and you can check other characteristics in the attached table: It has a flow at 10m of height of up to 25 liters/minute, about 1500/hour. It has a 2-year warranty and is from the Ideal manufacturer, located in Valencia. See product or also See technical sheet.

IDEAL Water Pressure Equipment, equipped with a single-phase 0.5hp pump IDEAL CPA 40M, with Flumatic automatic pressure controller that incorporates a manometer to know the pressure in the water circuit. The pressure switch turns the pump on and off automatically when a service is requested, such as turning on a faucet.

PRODUCT INFORMATION